The Chimney Sweep Woodstoves, Gas Stoves, Fireplaces, Cookstoves and Barbecues
The Chimney Sweep
Online Fireplace, Woodstove, Gas Stove and Barbecue Shop

Hearthstone Morgan Insert Installation Specifications
Dimensions... 20-3/4"T x 24-7/8"W x 23-3/4"D

Surround panel mounts in either of two positions to allow installation at various depths:
Flush Installation: 4-1/2" Extension onto hearth, 19-1/4" Extension into fireplace
Extended Installation: 9-1/2" Extension onto hearth, 14-1/4" Extension into fireplace

A: Minimum Fireplace Opening Width............................................... 25"
B: Minimum Fireplace Opening Height............................................... 23"
C: Minimum Fireplace Depth at Floor.................................................15"
D: Minimum Fireplace Depth at 20" above Floor............................... 15"
E: Minimum Fireplace Width at 15" Depth.................................. 19-1/2"
F: Minimum Hearth Width................................................................. 34"
G: Raised Openings: Hearth Surface must be raised to level of firebox floor
H: Minimum Hearth Depth (including extension if needed), Flush Installations..........20-1/2"
H: Minimum Hearth Depth (including extension if needed), Extended Installations... 25-1/2"
I : Stainless steel liner size.............................................................................................. 6"
J: Minimum Height from floor of fireplace to Combustible Trim.............................. 54-3/4"
K: Minimum Distance from Centerline of Fireplace to Combustible Side Trim........ 15-1/4"
L: Minimum Distance from Centerline of Fireplace to Combustible Side Wall......... 25-1/4"
M: Minimum Height from floor of fireplace to Combustible Mantel......................... 54-3/4"
M(a) Minimum Height from floor of fireplace to Combustible Mantel w/ Shield...... 42-3/4"

Area covered by surround panels....... 29"T x 40-1/2"W

Two Listed Methods for venting the Morgan wood insert:

Left: Minimum requirement. If the chimney is properly lined with terra-cotta liner tiles measuring 8" x 8" or smaller, a direct-connect installation is permitted. Remove damper assembly, cut and anchor a stainless steel sealer plate (removable for cleaning) at the throat of the fireplace. Insert a length of 6" stainless pipe long enough to reach into the bottom liner tile through a hole cut in the sealer plate.

Advantage: less expensive than full reline

Disadvantages: reduced updraft, increased creosote formation, insert must be removed to clean chimney.

Right: Preferred method, and required for zero-clearance fireplace installations or if existing chimney is unlined, if the liner is cracked or damaged, or if the flue opening is larger than 8" x 8". Remove damper assembly, install a 6" stainless steel liner the entire length of the chimney, passing through a stainless steel sealer plate at the top of the chimney; finish at top with stainless top clamp, storm collar and rain cap.

Advantages: better updraft, better performance, reduced creosote formation, chimney can be cleaned without removing insert.

Disadvantage: more expensive to install

To read more about installing your stainless liner, click here.

To return to the Morgan Insert page, click here. For other options, click a button below.

    back to our home page    Index by manufacturer

The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
1(360)-676-9080 FAX
http://www.chimneysweeponline.com

To send us E-Mail, Click Standard E-Mail Window or contact us (our reply form)
Copyright © 1996 - 2008 The Chimney Sweep, Inc.