The Chimney Sweep Online Fireplace, Woodstove, Gas Stove and Barbecue Shop

Cabinet Framing Specs - Heartland 36" Classic Refrigerators

CLEARANCE REQUIRED: 1/4" Sides, 1" Top, 1/2" Rear (add 1/4" to rear clearance for electrical outlet plate).

CABINET DIMENSIONS:
A: Opening Height (Minimum)...................................................... 70"
A: Opening Height w/Optional Nickel Cowl.................................. 76"
B: Opening Width..................................................................... 36-1/2"
C: Opening Depth..................................................................... 24-1/2"
D: Floor to Bottom of Anti-Tip Bracket................... 68-3/4"- 69-1/4"

CORNER OR EXTENDED SIDEWALL (HINGE SIDE) INSTALLATIONS:
F: Filler to Create Space Between Sidewall and Fridge Door............. 4"
G: Opening Width, Including Space for Filler.............................. 40-1/2"

Door Options: Specify left-hinged (hinges on left, handle on right) or right-hinged (hinges on right, handle on left).

Cabinet Floor: Must be level with finished kitchen floor.

Installation: For maximum stability, refrigerator is attached to backwall studs via supplied Anti-Tip Bracket located 69" up from floor. Slide unit into cabinet opening, raise rear by turning the rear roller adjustment screws clockwise until top rear of refrigerator is snug against Anti-Tip Bracket. Raise front by turning front adjustment screws clockwise until unit is level.

Electrical Requirements: 115 Volt, 60 Cycle, Single Phase, 15 Amp AC

To download the entire installation manual, click here.

To return to the 36" Classic Fridge page, click here. For other options, click a button below.

The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
1(360)-676-9080 FAX
http://www.chimneysweeponline.com

To send us E-Mail, Click Standard E-Mail Window or (our reply form)
Copyright © 1996 - 2008 The Chimney Sweep, Inc.