The Chimney Sweep Online Fireplace, Woodstove, Gas Stove and Barbecue Shop

ZERO CLEARANCE FIREPLACE INSTALLATION SPECS

FIREPLACE MODEL: NAPOLEON BGD40 SEE-THRU FIREPLACE

DIAGRAM #1: FRAMING THE ENCLOSURE
A: Opening Height, Floor to Header (minimum)...................... 36-1/4"
B: Opening Width (minimum)................................................. 42-1/2"
C: Framing Depth:. 22" minus thickness of finish material on both sides
D: Floor to Bottom of Enclosure Ceiling Framing ................... 37-3/8"
F: Floor to 7" Combustible Mantel (minimum)......................... 39-1/2"
G: Edge of Opening to Combustible Sidewall (minimum).................. 5"

DIAGRAM #2: FIREPLACE DIMENSIONS
J: Floor to Top of Top Extension Plate................................ 37-3/8"
K: Fireplace Height, Excluding Top Extension Plate............. 32-1/2"
L: Front Facia Width................................................................. 36"
M: Overall Width including Standoffs................................... 40-1/8"
N: Fireplace Depth.............................................................. 22-1/8"

DIAGRAM #3: VENTING:
The Vent collar is located at the top edge where the side panel meets the top panel, and is oriented on a 45-degree angle. Use a 5" / 8" coaxial 45-degree elbow to point straight sideways for side wall direct venting or up for vertical venting (through the roof).

ELECTRICAL AND GAS PLUMBING:
The two 3/8" M.P.T. gas inlet access holes and two Electrical wiring access holes are located in the sidewall opposite the vent side. The gas inlet holes are located centerline 6-1/2" back from the front and rear panels and 2-1/2" above the floor. The electrical inlet holes are located centerline 4-1/4" back from the front and rear panels and 2-1/2" above the floor.

For more detailed framing / installation instructions, view or print the pdf owner's manual by clicking here.

NOTE: THIS DIRECT VENT GAS APPLIANCE COMES WITH DETAILED, STEP BY STEP INSTRUCTIONS FOR DO-IT-YOURSELF INSTALLATIONS. TO VALIDATE YOUR WARRANTY AND ENSURE OPTIMUM SAFETY AND PERFORMANCE, HOWEVER,
FINAL SETUP ADJUSTMENTS AND INITIAL FIRING MUST BE ACCOMPLISHED BY A TRAINED GAS SERVICE TECHNICIAN. CONSULT YOUR GAS SUPPLY COMPANY FOR A LIST OF RECOMMENDED SERVICE TECHNICIANS IN YOUR AREA.

To return to the BGD40 See-Thru Fireplace page, click here. For other options, click a button below.

The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
1(360)-676-9080 FAX
http://www.chimneysweeponline.com

To send us E-Mail, Click Standard E-Mail Window or (our reply form)
Copyright © 1996 - 2009 The Chimney Sweep, Inc.