The Chimney Sweep Woodstoves, Gas Stoves, Fireplaces, Cookstoves and Barbecues
The Chimney Sweep Online Fireplace, Woodstove, Gas Stove and Barbecue Shop

CLEARANCES TO COMBUSTIBLE WALLS

STOVE MODEL: PACIFIC FUSION WOODSTOVE
STOVE DIMENSIONS: 22-1/4" WIDE X 26-3/4" DEEP X 36-1/4" TALL
CONNECTOR PIPE USED: 6" SINGLE-WALL OR DOUBLE-WALL STOVEPIPE
MINIMUM HEARTH EXTENSION BEYOND SIDES OF STOVE... 8"
MINIMUM HEARTH EXTENSION BEYOND DOOR OF STOVE... 16"
 MINIMUM HEARTH EXTENSION BEYOND REAR OF STOVE.... 1"
    FLAT WALL INSTALLATIONS: 
    CORNER INSTALLATIONS: 
A: STOVE TO BACKWALL:
   SINGLE-WALL STOVEPIPE... 13-1/2"
   DOUBLE-WALL STOVEPIPE.... 6-1/2"
   MOBILE HOME.............. 9-1/2"
   ALCOVE.................. 11-1/2" 
G: STOVE TO CORNER WALLS:
   SINGLE-WALL STOVEPIPE... 11-1/4"
   DOUBLE-WALL STOVEPIPE.... 4-1/4"
   MOBILE HOME.............. 8-1/4" 
B: STOVE TO SIDEWALL:
   SINGLE-WALL STOVEPIPE.... 19"
   DOUBLE-WALL STOVEPIPE.... 15"
   MOBILE HOME.............. 17"
   ALCOVE................... 17" 
H: CENTERLINE PIPE TO CORNER WALLS:
   SINGLE-WALL STOVEPIPE... 25"
   DOUBLE-WALL STOVEPIPE... 18"
   MOBILE HOME............. 22" 
C: CENTERLINE PIPE TO BACKWALL:
   SINGLE-WALL STOVEPIPE.... 22"
   DOUBLE-WALL STOVEPIPE.... 15"
   MOBILE HOME.............. 18"
   ALCOVE................... 20" 
I: DIAGONAL FROM CORNER TO FRONT LOP:
   SINGLE-WALL STOVEPIPE... 67"
   DOUBLE-WALL STOVEPIPE... 57"
   MOBILE HOME............. 63" 
D: CENTERLINE PIPE TO SIDEWALL:
   SINGLE-WALL STOVEPIPE.... 30"
   DOUBLE-WALL STOVEPIPE.... 26"
   MOBILE HOME.............. 28"
   ALCOVE................... 28" 
J: CORNER TO EDGE OF HEARTH:
   SINGLE-WALL STOVEPIPE... 60"
   DOUBLE-WALL STOVEPIPE... 53"
   MOBILE HOME............. 57" 
E: MINIMUM HEARTH WIDTH..... 34" 
L: WIDTH OF FRONT LOP...... 36" 
F: BACKWALL TO FRONT OF HEARTH:
   SINGLE-WALL STOVEPIPE... 53"
   DOUBLE-WALL STOVEPIPE... 46"
   MOBILE HOME............. 49"
   ALCOVE.................. 51" 
COMBUSTIBLE ALCOVE DIMENSIONS: 
MINIMUM 56" Wide
MINIMUM 90" Tall
MAXIMUM 48" Deep 
NOTE: DOUBLE-WALL STOVEPIPE REQUIRED FOR MOBILE HOME AND ALCOVE INSTALLATIONS

Setting up the Fusion to burn air from outside the house

OUTSIDE AIR SUPPLIED FROM VENTILATED CRAWLSPACE
Install a length of 4" rigid or flexible aluminum intake pipe down through a 4-1/8" hole in the floor anywhere under the pedestal, extending below the floor joists and insulation. The intake pipe doesn't attach directly to the stove: snip and flare the pipe at the top to hold it in place. Use silicone cement to glue a piece of 1/4" wire rodent mesh at the bottom.
OUTSIDE AIR SUPPLIED THROUGH BACKWALL
Remove the air intake cover from the back of the pedestal and insert a length of 4" rigid or flexible aluminum intake pipe extending through 4-1/8" hole in outside wall behind the stove. Attach a standard 4" dryer vent termination on the outside of the wall, removing the flapper plate and substituting a piece of 1/4" rodent mesh silicone-cemented in place.

To Return to the Fusion Page, click here. For other options, click a button below:

Wood Stoves    back to our home page    Index by manufacturer

The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
1(360)-676-9080 FAX
http://www.chimneysweeponline.com

To send us E-Mail, Click Standard E-Mail Window or contact us (our reply form)
Copyright © 1996 - 2008 The Chimney Sweep, Inc.