The Chimney Sweep Online Fireplace, Woodstove, Gas Stove and Barbecue Shop

Forever Flex Insert Liner:
Connecting The Liner in Tight-fitting Insert Installations

The Problem: sometimes, a fireplace insert is such a tight fit in the fireplace that there isn't room above the insert to get your hands in and attach the insert connector to the flue collar.

Solution 1: if you have extra width in the fireplace opening, the first thing to try is sliding the insert all the way to one side, and making the connection by reaching through the other side. You can center the insert in the fireplace opening after you've made the connection.

If there isn't room for that technique, try this trick.

You'll need: A short length of 1" dowel or 1x1: A length of stout rope: A long standard screwdriver

Attach insert connector to bottom of liner Lower down chimney to insert height Cut a 1" dowel or scrap wood to 6" length Tie a stout rope around the dowel Insert the dowel into the insert connector Turn the dowel horizontal, wedge into place Remove the baffle from the insert Slide the insert into the fireplace Thread rope through the insert's flue collar Pull insert connector down into exhaust collar Tighten the draw band with long screwdriver Use the screwdriver to dislodge the dowel

The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
1(360)-676-9080 FAX
http://www.chimneysweeponline.com

To send us E-Mail, Click Standard E-Mail Window or (our reply form)
Copyright © 1996 - 2008 The Chimney Sweep, Inc.