The Chimney Sweep Woodstoves, Gas Stoves, Fireplaces, Cookstoves and Barbecues
The Chimney Sweep Online Fireplace, Woodstove, Gas Stove and Barbecue Shop

GAS FIREPLACE INSERT
COMPARISON PAGE


FUEL: NATURAL GAS
 For our LP (Propane) comparison page, click here

SORTED BY: FIREPLACE OPENING SIZE REQUIRED

TO SORT THE TABLE, CLICK THE HEADING AT TOP OF EACH COLUMN (IE; FIREPLACE OPENING, INPUT, ETC.)
MODEL
FIREPLACE
OPENING
REQUIRED
INPUT
MINIMUM
(BTU/HR)
INPUT
MAXIMUM
(BTU/HR)
HEATING
EFFICIENCY
(PERCENT)
OUTPUT
MINIMUM
(BTU/HR)
OUTPUT
MAXIMUM
(BTU/HR)
HEATING
CAPACITY
(SQ.FT.)
VIEWING
WINDOW SIZE (SQ.IN.)
CLICK HERE FOR DETAILS
25"T
36"W
17"D

6,000

40,000

80.3%

4,818

32,120

UP TO
2,000

22"T
32"W
17"D

21,000

32,000

80.1%

16,821

25,632

UP TO
1,500

HEARTHSTONE
KILLINGTON HT
INSERT

21"T
28"W
17"D

13,000

33,000

81%

10,530

26,730

UP TO
1,600

NOTES

INPUT RATINGS:
Manufacturers size their gas appliances by the heat INPUT rating, measured in British Thermal Units (BTU's). This is a measurement of the heat value of the gas the appliance burns per hour. If the rate of burn is adjustable, the input rating is given at both the lowest and highest burn settings. One THERM of natural gas or one GALLON of LP gas each contain about 100,000 BTU's of heat value, so a gas appliance with an input rating of 20,000 - 30,000 BTU/hr will consume approximately one therm of natural gas or one gallon of LP every five hours when adjusted to its lowest setting, and every 3-1/3 hours when adjusted to its highest setting.

EFFICIENCY RATINGS:
The steady state efficiency rating tells us how effectively a given gas appliance turns fuel into heat. Many factors affect this rating, including altitude, composition of fuel gas, length of intake/exhaust pipe, outdoor temperatures, atmospheric conditions, etc. Some companies publish only the lowest tested efficiencies, some just the highest, some publish both the lowest and highest, and some use an average. For this chart, we've used the AVERAGE steady state efficiency rating, interpolating the unpublished data where necessary.

OUTPUT RATINGS:
To determine the minimum & maximum heat OUTPUT, we multiply the minimum & maximum INPUT ratings by the EFFICIENCY rating. For example, a gas stove or fireplace with an efficiency rating of 75% and an adjustable input rating of 20,000 - 30,000 BTU/hr will deliver 15,000 BTU's of heat per hour at its lowest setting (20,000 x 75%), and 22,500 BTU's of heat per hour at its highest setting (30,000 x 75%).

 

Sweepy

The minumum output and maximum output columns in the table above define each insert's power range. Below is a chart showing the heat output power ranges for all the natural gas insert models we sell, organized by the size of the house each will heat. Numbers at the left and right of each insert's power bar are heat output at lowest and highest settings, expressed in BTU's per hour.

Click any power bar to go to that insert's page.

SMALL AREA
200 - 1,000 SQ. FT. 		MEDIUM AREA
1,000 - 1,600 SQ. FT. 		LARGE AREA
1,600 - 2,000 SQ. FT. 
           |    |    |    |    |     |    |       |       |      |     |       | 
          200  300  500  600  700   800 1000    1200    1500   1600  1800    2000

To visit (or return to) any insert's page, click its name in either table above

Go to Gas Inserts        back to our home page

The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
1(360)-676-9080 FAX
http://www.chimneysweeponline.com

To send us E-Mail, Click Standard E-Mail Window or contact us (our reply form)
Copyright © 1996 - 2008 The Chimney Sweep, Inc.