The Chimney Sweep Online Fireplace, Woodstove, Gas Stove and Barbecue Shop
Forever Flex Insert Liner:
Connecting The Liner in Tight-fitting Insert Installations
The Problem: sometimes, a fireplace insert is such a tight fit in the fireplace that there isn't room above the insert to get your hands in and
attach the insert connector to the flue collar.
Solution 1: if you have extra width in the fireplace opening, the first thing to try is sliding the insert all the way to one side, and making the
connection by reaching through the other side. You can center the insert in the fireplace opening after you've made the connection.
If there isn't room for that technique, try this trick.
You'll need: A short length of 1" dowel or 1x1: A length of stout rope: A long standard screwdriver
Attach insert connector to bottom of liner|
Lower down chimney to insert height
Cut a 1" dowel or scrap wood to 6" length
Tie a stout rope around the dowel
Insert the dowel into the insert connector
Turn the dowel horizontal, wedge into place
Remove the baffle from the insert
Slide the insert into the fireplace
Thread rope through the insert's flue collar
Pull insert connector down into exhaust collar
Use a long screwdriver to dislodge the dowel
The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
To send us E-Mail, Click Standard E-Mail Window or
(our reply form)
Copyright © 1996 - 2018 The Chimney Sweep, Inc.