The Chimney Sweep Logo
The Chimney Sweep Online Fireplace, Woodstove, Gas Stove and Barbecue Shop

Do Wood Stove Efficiency Ratings Relate to Emissions Ratings?

Q: Greetings,
I'm just beginning to educate myself on modern-day wood stoves (been using a Fisher for decades) and I've seen stoves online for example, where one has an efficiency rating of, say, 75% with emissions at 3.5 gm/hr., and another stove will have efficiency of 72% w/ emissions at 2.3. I can't make sense of that. Can you shed some light on how these calculations are derived?
Thank you
Roger

SweepyHi Roger,

Thanks for the inquiry! A woodstove's heating efficiency rating doesn't correlate directly to its emissions rating. In fact, those numbers are arrived at in two different tests:

Emissions testing is performed in EPA-approved test labs using the EPA's prescribed protocol. When testing for emissions, a nailed-together "charge" of dimensional Pine is burned, and the particulate matter in the exhaust is measured throughout the duration of several fires at various draft control settings. In this way, an average grams/hour particulate emissions rating is derived. Heating efficiency is not measured during EPA emissions testing.

Heating Efficiency testing is performed using full loads of seasoned cordwood, and is designed to measure how much of the heat value contained in the wood is extracted and delivered into the living space. When testing for heating efficiency, the following criteria are examined:

Extraction Efficiency: the load is weighed going in, and the particulate emissions and ashes are weighed after the fire to determine how effectively a given firebox design breaks down the fuel to extract the available heat.

Heat Transfer Efficiency: this testing is performed in calorimeter rooms equipped with temperature sensors. Similar temperature sensors are installed in the exhaust flue. The degree changes in the room and flue are monitored for the duration of the test fires to determine how much of the heat extracted by the fire is delivered into the room, as compared to the heat lost up the flue.

Although a low emissions weight can improve a given stove's Extraction Efficiency score, the total amount of particulate emissions produced by today's EPA approved woodstoves is so small that the affect of particulate emissions on the overall heating efficiency score is negligable. Thus, even a model with an unusually low Emissions rating doesn't necessarily score a high Heating Efficiency rating.

Consider the two models you mention: the 1.2 gram/hr difference would lighten the total weight of emissions from the cleaner-burning stove by about 10 grams at the end of an 8-hour test burn. Most likely, those 10 grams would be found in the ash remaining in the firebox, eliminating any advantage in Extraction Efficiency. Even if the 10 grams weren't found in the ashes, a difference of 10 grams of particulates from a 40 lb. load of wood would only amount to a .06% advantage in Extraction Efficiency, which would have virtually no effect on the overall Heating Efficiency score.

You can read more about woodstove efficiency testing from the viewpoint of the test labs here.

 

Yellow Book Icon       Home Button

The Chimney Sweep, Inc.
913 Harris Avenue
Bellingham, WA 98225-7032
1(888)-354-6722 toll-free in U.S. & Canada
1(360)-676-9080 FAX
http://www.chimneysweeponline.com

To send us E-Mail, Click Standard E-Mail Window or Contact Us Button (our reply form)
Copyright © 1996 - 2018 The Chimney Sweep, Inc.